> Training Courses > Control technology and PLC Training Courses

Registration | Enquiry | PDF

PLC - Introduction to PLCs
I51 TR-CT-PLC-INTRO

Target Group

This course is designed for maintenance/operator personnel who will be working with PLCs for the first time, with a requirement for understanding of what PLC’s are, how they work and their limitations. Understand their uses, functions and control using programming software.

(Pre) Knowledge

To join this course, a basic knowledge of Windows XP would be an advantage. No previous PLC experience is required as the courses starts at a basic level.

plc training course maintenance automation


Global Content

Maintenance/operator services are often confronted with equipment from several manufacturers. This course recognises that maintenance/operator personnel may not have had any previous experience with PLCs so they cannot build up a profound technical knowledge of all the equipment to be maintained. One needs to have sufficient knowledge of the equipment, coupled with knowledge of the installation to be able to diagnose the problem and then solve the problem.

With regard to PLCs and programming terminals, the maintenance engineer/operator needs to be able to access specific parts of the program and to examine the I/O status. Programming and documenting the program is of less importance. The maintenance engineers should be capable of making small changes to the program.

Problems are most likely to occur with the installation itself and this is reflected in the PLC. For instance, a defective sensor, a badly working cylinder etc. These faults can be investigated via the programming terminal and the signal status can be presented dynamically. This course will give the engineer/operator sufficient confidence and skill to connect a programming terminal to the PLC and obtain information on faults and general operating information.

Following the course, the maintenance engineer/operator should be capable of executing the following actions:

  • Learn the basic principals of how a PLC works.
  • Understand how Input & Output modules are used with Switches & Indicators.
  • Learn the role of the process and monitor the run-time behaviour of the system as a whole.
  • Gain an understanding of system issues such as CPU memory & Fault diagnostics.
  • To determine that the signal of the ‘suspected’ unit will show at the correct PLC reference. One should measure here with a universal meter.
  • To start up the programming terminal & communicate with the PLC.


The maintenance engineer will also be able to read the documentation, understand the structure of the PLC and be aware of the most commonly used PLC instructions.

Methods

ATS courses are given by highly qualified trainers, with practical knowledge, in professional ATS training centres or On-Site. Prior to the course an intake conversation can take place to define the participant(s)and the company's requirements. Presentations (theory and examples) as well as practical exercises bring the courses to life. ATS courses are interactive, the trainer will always make sure the training contents link back to your situation.

Specific Contents

PLC Topics

Lesson 1

  • What is a PLC
  • How does it work

Lesson 2

  • Hardware of the PLC ( Allen-Bradley or Siemens )
  • Understand the diagnostic LED’s and signal indicators
  • Concept of switches & Indicators
  • Understand the role of the PLC

Lesson 3

  • Input & Output Addressing
  • Monitor the run-time behaviour of the system

Lesson 4

  • Backing up programmes to disk, file save & load
  • How to add documentation to a programme
  • Set up Communications from PC to CPU

Lesson 5

  • Understanding of Bits, Timers, Counters
  • Create a basic PLC programme
  • Download/Upload the programme
  • Make changes to Data (temperature, speed etc.)
  • Fault diagnostics

Days

2

PLC - Introduction to PLCs: Price

870 (USD excl. VAT / per person)

PLC - Introduction to PLCs: Training Seats - USA

flag Upon request, 2 days
On-site Registration
flag Upon request Registration

PLC - Introduction to PLCs: Training Seats - International

flag 12 en 13 september
Wemmel (BE) Registration
flag 4-6 October 2017
Sydney (AU) Registration
flag 10-12 October 2017
Brisbane (AU) Registration
flag 31 oktober en 1 november
Dalfsen (NL) Registration
flag 21 en 22 november
Weert (NL) Registration
flag 19 en 20 december
Haarlem (NL) Registration


We also recommend:

Control Software Design
Certified PLC Programmer
PLC - Proficy Logic Developer Machine Edition
PLC - Introduction to PLCs


email